LIMIT THERMOSTAT

FIG. 18-1 LIMIT THERMOSTAT

 

Location:

 

The limit thermostat is located on the tank lid (on the

 

front of the tank on twins).

FIG. 18-2 LIMIT THERMOSTATS

 

Test Procedures:

1.Disconnect the brewer from the power source and allow to cool.

2.Disconnect the wires from the limit thermostat.

3.With an ohmmeter, check for continuity across the limit thermostat terminals.

If continuity is present as described, the limit thermostat is operating properly.

If continuity is not present as described, replace the limit thermostat.

Removal and Replacement:

1.Remove the wires from limit thermostat termi- nals.

2.Carefully slide the limit thermostat out from under the retaining clip and remove limit thermostat.

3.Carefully slide the new limit thermostat into the retaining clip. Ensure the metal face has good contact with tank.

18

42461 0911809

 

Page 18
Image 18
Bunn ICB/TWIN, ITB/ITCB manual Limit Thermostats