TROUBLESHOOTING (cont.)
REFILL CIRCUIT
PROBLEM
Will not refill
PROBABLE CAUSE
1.Power off to brewer
2.Water shut off
3.Error Message
4.ON/OFF Switch (If equipped)
5.Lime build up on Probe(s)
6.Refill Valve or Control Board
REMEDY
Press ENABLE BREW switch on control panel to determine if power is ON.
Make sure water is ON.
Brewer has shut down due to mal- function (See Diagnostic Section in this manual).
Make sure ON/OFF Switch is "ON" and indicator is lit.
Remove the Level Probe(s) and check for lime deposit on tip. Clean and reinstall.
Check valve.
Refill does not shut off | 1. | Lime build up on probe | Remove Level Probe and check |
Power "ON" |
|
| for lime deposits on tip. Clean and |
|
|
| reinstall. |
| 2. | Water Level Sensing System | Replace control board |
| 3. | Refill valve or control board | Check valve. |
|
|
|
Refill does not shut off | 1. Refill valve | Clean or replace valve as needed. |
Power "OFF" |
|
|
5 | 42461 0911809 |
|
