Bunn LCA-1, LCR-1 service manual Programming the Dispenser, Program Mode Description

PROGRAMMING THE DISPENSER (Cont.)

Program Mode: Used to change or enter new set-up values.

To enter the Program Mode, Set the RUN/NIGHT/PROGRAM Switch to the PROGRAM position, the unit will display “__PPP” to indicate it is in the Program Mode. Use the MENU switch to scroll to the next display. Use the Increase (+) and Decrease (-) switch to adjust the values.

LED DISPLAY

0180

130

2 0. 0

3 0. 0

4 0. 0

XX.X

PROGRAM MODE	DESCRIPTION
Tank Temperature	Default = 180°F (82°C)
	Range = 120° - 200°F (49 - 93°C)
	Ready Temp = Tank Temp minus 10°F
	(~5.5°C)
Dispense Ratio	Set Coffee Mix Ratio
	Default = 30:1
	Range = 20 Max / 100 Min
Portion Volume	Set Portion Dispense Volume
	Default = 0.0, Disabled
	Range = 16.0 / 40.0 Oz.
	(0.5 / 1.2 L)
Dispense Total	Hold Decrease Switch to Reset Total
	to Zero. 0.0 Gal (0.0 L)
Rinse Alarm Timer	Default = OFF (Rinse Alarm Disabled)
	Range = 8 - 24 hrs
Software Version	Displays Software Version # -
	Exits To Home View After 3 Seconds.

13 44806.1 081211