PROGRAMMING (Continued)
LCD DISPLAY
TANK TEMP 190
READY TEMP 180
CABINET TEMP 38
ACTION
Use the (+) or
Use the (+) or
Use the (+) or
DESCRIPTION
Sets the water Tank temperature: (120 - 200°F) or (49 - 93°C)
Sets the hot water Ready temperature: Typically set to the min. desired dispense temp.
Sets the Chilled cabinet target temperature: (38 - 50°F) or (3 - 10°C)
The following functions can be Password Protected. If you wish to prevent others from accessing these functions, enter a 4 digit code of your choice. Record your password code [_ _ _ _], as you will need it to access these functions in the future.
LCD DISPLAY
ACTION | DESCRIPTION |
ENTER PASSWORD
SET PASSWORD ?
2 OR 3 PRODUCTS?
(2)EXIT (3)
|
|
|
| SELECT UNITS | |||
|
|
|
| ENG | EXIT METRIC | ||
|
|
|
|
| |||
|
|
|
|
| |||
|
|
|
| REFRIGERATION ? | |||
| If ON | ON | EXIT | OFF | |||
|
|
|
| ||||
|
|
|
|
| |||
|
|
|
| DEICE CYCLE TIME | |||
|
|
|
| 120 MIN (+) | |||
|
|
|
|
| |||
|
|
|
|
| |||
If NO | RINSE ALARM ? | ||||||
NO | EXIT | YES | |||||
| If YES | ||||||
|
|
|
| ||||
|
|
| |||||
|
|
|
| RINSE TIME ? | |||
|
|
|
| 12 HRS | (+) | ||
|
|
|
|
| |||
|
|
|
|
| |||
|
|
|
| RINSE LOCKOUT ? | |||
|
|
|
| NO | EXIT | YES | |
|
|
|
| ||||
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
to Next Page
Use the (+) or
Use the (+) or
Select the number of products to be dispensed
Select the preferred units.
Select OFF to disable the Refrigeration system
Select the time delay between automatic deicing of the cabinet
Select (YES) or (NO)
Use the (+) or
Select (YES) to enable
Enter the access Code to view the remaining functions. Factory Default = 0.
Enter your own Code to prevent access to the remaining functions. [0 to 9999]
Used to switch from standard 3 products to 2 products w/Autoswitching of the Left and Middle Bibs.
Used to select the preferred units of measurement. (Oz., Gal, deg F) or (mL, L, deg C)
Select OFF to temporarily override a cooling system fault and allow the machine to dispense coffee.
If ice builds up on the evaporator - decrease the delay. If the cabinet is not cold enough - increase the delay.
Factory Default=120 (2 hrs)[min=30, max=180]
Selecting Yes will enable the Rinse Alarm function, (see Rinse Alarm)
Enter the desired time between required Rinse Cycles in hours. [8 to 24 hrs]
Select YES to Lockout dispensing until the Rinse Alarm has been cleared. Default is NO.
13 | 41129 071409 |
|
