Bunn LCR-3 service manual Operating Controls and Interface

OPERATING CONTROLS AND INTERFACE

1.Master ON/OFF Switch: Disconnects AC Power to the dispenser.

2.Hot Water Handle: Pull and Hold to dispense hot water manually.

3.Door Interlock Switch: Unit will not dispense product if the door is open.

4.LCD Display: Displays status, programming menus and fault messages.

5.Volume Selection: Rotate dial to the desired volume prior to dispensing product.

6.Dispense Switches (A-B-C): Push and Release to dispense the desired product. (These also double as programming switches in the Set-Up mode).

7.Function Selector Switch: Allows the user to set the dispenser into different dispensing modes.

a.RINSE: Dispenses hot water only - Flushes the mix chamber and dispense tip.

b.RUN: Normal dispense mode - Dispenses mixed product (concentrate and water).

c.PRIME: Dispenses concentrate only – Primes the concentrate pump.

8.Hidden Set-Up / Programming switches.

a.Press and hold the Right switch for 5 sec. to enter in the Set-Up mode.

b.Use the Right switch to scroll down and the Left switch to scroll up through the menu screens.

3

2

4
8
6
7	1
5

8 41129 052208