PROGRAMMING THE BREWER (cont.)
SET PULSE BREW - EASY PULSE SETUP
NOTE: The procedure to enter the PULSE BREW function must be performed prior to following the steps listed below.
1.The display should read BREW TIME: X.XX and a batch size indicator will be flashing.
2.Using
3.When finished, select another batch size to be set by pressing the switch next to the indicator light. Repeat step 2 for each batch size to be set.
4.When finished setting all batch sizes, press done. The display should read 3 BATCHES DONE ?.
5.If the three batch sizes are not correct, press and release NO to return to BREW TIME setup screen and repeat steps 2 thru 4. If they are correct, press YES. This will display the 1st, OFF, and LAST times for 5 seconds, then advance to the DRIP TIME setup. (See DRIP TIME SET UP)
SET PULSE BREW?
NO YES
ENTER TIMES?
NO YES
SEE SET PULSE BREW-
ENTER TIMES
EASY PULSE SETUP | ||
NO |
| YES |
BREW TIME XX.X | ||
DONE | (+) | |
3 BATCHES DONE? | ||
NO |
| YES |
1st | OFF | LAST |
XX.X | XX.X | XX.X |
| 5 SEC. DELAY |
|
DRIP TIME XX.X | ||
DONE | (+) | |
3 BATCHES DONE?
NO YES
COFFEE NAME SETUP COMPLETE
Page 22 | 41341 080108 |
|
