INTRODUCTION
The brewer incorporates a wireless interface system that allows the DBC Grinder to load certain information into the "programming tag" located inside the handle of the funnel. This information includes what flavor of coffee is being ground and what batch size will be brewed (small, medium, or large). Once the correct flavor name and amount of coffee is ground, the funnel is loaded into the brewer. The information from the funnel handle is then transferred into the brewer. The brewer then takes this information and dispenses the amount of water preset in the brewer for that particular flavor of coffee and batch size. The brewer can also be programmed to adjust different functions of the brewing process, such as brew temperature, brew volumes, bypass percentages, pulse brew, etc. This allows the operator to program a certain "recipe" for each coffee flavor to be brewed.
TABLE OF CONTENTS |
|
PROGRAMMING | 5 |
Programming Switches | 5 |
Programming the Brewer | 7 |
PROGRAM FUNCTIONS (LEVEL 1) |
|
Brew Lockout | 7 |
Recipe Programing Methods | 7 |
Flow Diagram | 9 |
PROGRAM FUNCTIONS (LEVEL 2) |
|
Set Units (Setting units of measure) | 11 |
Enable Energy Saver | 12 |
Set New Recipe (using a Smart Funnel and | 13 |
Set Brew Volumes | 13 |
Set | 14 |
Set Pulse Brew Times | 14 |
Set Drip Times | 14 |
Set New Recipe (using a Recipe Card) | 15 |
Set New Recipe (no Smart Funnel nor | 16 |
Review Recipes/Modify Recipes/Set up No Name Coffee | 17 |
Set Brew Volumes | 18 |
Set Bypass Percentages | 19 |
Set Pulse Brew Times | 20 |
Easy Pulse | 21 |
Enter Times | 23 |
Set Preinfusion | 24 |
Set Drip Times | 25 |
Assign Recipes | 26 |
Copy Settings | 26 |
Enable Ads | 27 |
Set Temp (Brewing Temperature) | 27 |
Set Ready (Ready Temperature) | 28 |
Refill (Adjust Sensitivity) | 28 |
Spray Oz/M (Read sprayhead flow rate) | 29 |
Bypass Oz/M (Read bypass flow rate) | 30 |
Calibrate Flow | 31 |
Calibrate Sprayhead Flow | 31 |
Calibrate Bypass Flow | 32 |
Brew Counters (View/Reset) | 33 |
Funnel and Server Detect | 34 |
Service Tools | 35 |
Test Outputs (Components) | 35 |
Test Switches | 37 |
Test Servers | 37 |
Test Frequency | 37 |
Factory Defaults (Reset) | 38 |
Page 3 |
|
| 41341 101911 |
