PROGRAMMING
Using the
Programming of the brewer is achieved by entering a certain function. Then, by the use of hidden programming switches, the operator can customize the brewing process to their specifications.
PROGRAMMING SWITCHES
To access the programming mode, and to scroll through the different function screens, hidden programming switches are used. There are five of these switches that will be used for the setup of the brewer.
SINGLE BREWERS | DUAL BREWERS |
| |
1 | 2 |
| |
|
| ||
2 | READY TO BREW | 1 | |
READY TO BREW | |||
| |||
WATER TEMP: 200° | WATER TEMP: 200° |
|
P2450
P2289
3 | 4 | 5 | 3 | 4 | 5 |
1.® symbol (upper right of the BUNN logo)
This is used to access the programming mode and is also used to scroll forward through the function list.
2.Upper left corner of the "B" in the BUNN logo
This is used to scroll backwards through the function list.
3."Digital" (lower left under the display)
This is used to select options that appear on the display during programming.
4."Brewer" (center under the display)
This is used to select options that appear on the display during programming.
5."Control" (lower right under the display)
This is used to select options that appear on the display during programming.
Page 5 | 41341 080108 |
|
