Bunn SNG0033000 manual Drip Time now displayed on non funnel lock units as well, Setup Complete

PROGRAMMING THE BREWER (cont.)

DRIP TIME (now displayed on "non" funnel lock units as well)

This function allows the setting or modification of the funnel locks to stay engaged after the end of a brew cycle. This ensures the funnel cannot be removed until after the liquid has emptied out of the funnel.

Procedure to modify drip times:

Range: OFF to 10 minutes for all three batch sizes.

NOTE: If the brewer is already in the DRIP TIMES screen, it is not necessary to follow steps 1 through 9 in this section, but proceed directly to step 10.

1.Press and hold the upper right hidden switch until the display reads UNITS. Release the switch. Press and release switch until the display reads REVIEW RECIPES.

2.Press YES to proceed. The display should now read:

NO NAME, along with MODIFY, SHOW and NEXT (SINGLE brewers)

NO-NAME LEFT, along with MODIFY, SHOW and NEXT (DUAL brewers).

3.Press and release NEXT to advance to the desired coffee name to be modified.

4.Press and release MODIFY. The display should read BREW OZ.

5.Press and release DONE. The display should read 3 BATCHES DONE?.

6.Press and release YES. The display should now read % BYPASS.

7.Press and release DONE. The display should read 3 BATCHES DONE?.

8.Press and release YES. The display should now read SET PULSE BREW.

9.Press and release NO. The display should now read DRIP TIME, along with either the word OFF, or a time will be showing. A batch light should also be blinking.

10.Using the (-)and (+), set the amount of time from when the brew solenoid shuts off to when drip-out occurs for that batch size.

11.When finished, press another batch size and repeat step 10 until all three sizes are set.

12.When finished, press DONE. The display should read 3 BATCHES DONE?

13.If the three batch sizes are set correctly, press YES. The screen should show the name of the coffee flavor being programmed (modified) along with

SETUP COMPLETE.

14.After a 5 second delay, the display will advance to the next coffee name in the brewer's memory. If no other coffee names are present, the display will read THAT WAS THE LAST RECIPE, and return to the REVIEW RECIPES screen.

	REVIEW RECIPES?
	NO		YES
EXIT TO
NEXT FUNCTION		SINGLE
SCREEN
		BREWERS	DUAL
NO-NAME			BREWERS
MODIFY SHOW NEXT
			NO-NAME LEFT
			MODIFY SHOW NEXT
SCREEN DISPLAYED	PRESS
BREW OZ: XX.XX	DONE
3 BATCHES DONE?	YES
% BYPASS XX.X	DONE		ADVANCES TO ALL OTHER
3 BATCHES DONE?	YES		COFFEE NAMES PROGRAMMED
SET PULSE BREW?	NO		IN THE BREWER"S MEMORY
SET PREINFUSION?	NO
DRIP TIME XX.X			(COFFEE NAME)
			MODIFY SHOW NEXT
(-) DONE (+)
			WHEN THE LAST COFFEE
3 BATCHES DONE?			NAME IN BREWER'S MEMORY
NO	YES		IS DISPLAYED, PRESSING
			NEXT WILL EXIT AND THE
			DISPLAY WILL THEN READ:

COFFEE NAME

SETUP COMPLETE THAT WAS THE

NOTE: Set to OFF to prevent funnel locks from engag- ing (to disable this function), for a particular batch size. To set to OFF, press and release (-)until OFF is displayed.

EXITS TO THE NEXT COF- FEE NAME IN BREWER'S MEMORY. IF NO OTHER COF- FEE NAMES ARE ENTERED IN THE BREWER"S MEMORY, THE DISPLAY WILL THEN READ:

LAST RECIPE

Page 25 41341 080108