SERVICE (cont.)

LAMP HOLDER/SOCKET ASSEMBLY

ULTRA-2 shown

FIG. 49 LAMP HOLDER/SOCKET ASSEMBLY

Location:

The lamp holder/socket assemblies are located inside the hopper covers.

Test Procedures:

1.Disconnect the lamp cord assembly from the lamp cord connector.

2.Remove the lamps from the lamp holder/socket assembly.

3.With a voltmeter, check the voltage across the pin sockets in the plugs in the “DAY” mode. Reconnect the lamp cord to the lamp cord connector. The indication must be approximately 12.6 volts dc.

4.Disconnect the lamp cord from the lamp cord con- nector.

If voltage is present as described, the lamp holder/ socket assembly is operating properly.

If voltage is not present as described, replace the lamp holder/socket assembly.

5.Check for continuity across the terminals on the lamps.

If continuity is present as described, the lamps are operating properly.

If continuity is not present as described, replace the lamp.

Removal and Replacement:

1.Disconnect the lamp cord assembly from the lamp cord connector assembly in the top of the auger motor cover.

2.Remove the hopper cover with the lamp cord as- sembly from the hopper.

3.Remove hopper cover liner from the hopper cover.

4.Cut off the closed-end splices connecting lamp cord assembly to the lamp holder/socket assembly.

5.Remove the two lamps.

6.Remove the two #2-56 screws and elastic lock nuts securing the lamp holder/socket assembly to the mounting bracket. Remove lamp holder/socket assembly and discard.

7.Install new lamp holder/socket assembly on mount- ing bracket using two #2-56 screws and elastic lock nuts.

8.Reinstall lamps.

9.Strip the wires from the lamp cord assembly ap- proximately .38”.

10.Using the two wire nuts, supplied, connect the lamp cord assembly to the new lamp holder/socket assembly wires.

11.Reinstall the hopper liner to the bottom of the hop- per cover.

12.Reinstall the hopper cover to the hopper.

13.Plug in the lamp cord assembly to the lamp cord connector assembly on left top of the auger motor cover.

14.Refer to Fig. 50 when reconnecting the wires.

P1322

FIG. 50 LAMP HOLDER/SOCKET ASSEMBLY WIRES

51

41084 102709

 

Page 50 Page 52
Page 51
Image 51
Bunn ULTRA-2 manual Lamp HOLDER/SOCKET Assembly
Page 50 Page 52

ULTRA-2 specifications

The Bunn ULTRA-2 is an exceptional frozen beverage dispenser that caters to both commercial and home use, making it a popular choice in various establishments such as cafes, restaurants, and convenience stores. Renowned for its reliability and efficiency, the ULTRA-2 serves a wide range of frozen beverages, including slushes, smoothies, and frozen cocktails, providing an irresistible treat for customers.

One of the standout features of the Bunn ULTRA-2 is its high-capacity design. With a dual hopper system, this machine allows operators to serve two different flavors simultaneously. Each hopper can hold up to 3.2 gallons of product, allowing for continuous service without the need for frequent refills. This is particularly advantageous during peak hours when demand is high.

The ULTRA-2 is equipped with Bunn's advanced refrigeration technology, which ensures rapid freezing and consistent product quality. The machine uses a patented freezing mechanism that maintains optimal product texture and temperature, resulting in a smooth, uniform consistency that keeps customers coming back for more. Additionally, the ULTRA-2's adjustable temperature control allows operators to customize the consistency of the beverages to their liking.

User-friendliness is another hallmark of the Bunn ULTRA-2. The machine features intuitive controls that simplify operation, making it easy for staff to learn and use efficiently. A built-in safety feature prevents the machine from operating when the hoppers are too low, minimizing waste and ensuring product quality.

Durability and ease of maintenance are also prominent characteristics of the ULTRA-2. Constructed from high-quality stainless steel, the machine offers enhanced longevity and is resistant to rust and corrosion. The removable hoppers and door assemblies facilitate quick cleaning and maintenance, allowing businesses to keep the machine in top working condition with minimal effort.

In summary, the Bunn ULTRA-2 stands out in the crowded market of frozen beverage dispensers through its dual hopper functionality, advanced refrigeration technology, user-friendly design, and robust construction. Whether for a busy café or a family gathering, the ULTRA-2 provides a reliable solution for delivering delicious frozen beverages that satisfy a variety of tastes and preferences.
Top Page Image Contents