Bush 1080P instruction manual Troubleshooting

BPress STOP button to stop the program recording being played.

CFor Playback the recorded program. Press INDEX button to open the recorded list.

Press button to select the content you recorded. Press the button to display the program information.

Press button to cancel.

Press OK or PLAY/PAUSE button to play the

program recorded and press STOP button to stop it.

Note

OChanging the channel will not influence the

recording in the same frequency, but will influence the time shift. When the recorded program is being played, you can not delete it.

OPress the INDEX button repeatedly, the program will be displayed in the order of program name, channel name, program time, file name and file length.

05 Reference Sections

TROUBLESHOOTING

„To assist in location of possible faults use the help guide below:

	Verify if the television is
No picture, no	properly plugged in.
	Verify if the television has a
sound
	proper supplied power source.
	Verify if electricity is available.
	Verify if correct signals are
	input.
Blank screen	Operate the remote to change
	signal input to correct input.
	Restart the television if power
	supply is interrupted.
	Press MUTE button and verify if
	Mute mode is set.
No sound	Switch to other channel and
	verify if the same problem
	happens.
	Press VOL+ button to see if the
	problem can be solved.
Poor sound	Verify if sound system is correct.
	Refer to user‘s manual for
	adjustment.
No picture in	Verify if correct channel is
	selected.
some channel
	Adjust the antenna.
No color for	Verify if the same problem exists
	in other channels.
some channel	Check out of picture and sound
program	systems.
(black and	Refer to relative instructions
white)	in the Manual for color
	adjustment.
	Verify if the antenna is correctly
Spots with	connected.
	Verify if the antenna is in good
some or all
	condition.
pictures
	Make fine adjustment of
	channel.

P.26 BUSH 1080p Digital LED LCD User Manual Helpline: 0845 604 0105