your device has several disks.
E Press | button to select Format and press to | |
enter. Press | button to select the size you want | |
to format. Press OK button to format the USB Disk.
Note
OThe system will format the whole device and if your device size is bigger than 1GB, you can set the size which is used for time shift.
FFormat may take several minutes and the time is
depending on the memory size. Press button to select the Time Shift Disk Size. The max device size for Time Shift is 8GB. Then, press OK button to save.
OThe minimum device size for record is 1GB. Provide device formatting function is up to 2TB. The max
OBit rate:
tDevice
tDevice
tDevice
OThe system can not work normally if the USB device have the listing problem below:
t The device has bug.
t The device has error block.
t The device reports the unfaithful size.
IMPORTANT |
| |
t USB device should be format as FAT32 format by | features | |
your PC before insert to the USB connector. | ||
|
TIME SHIFT 
theUsing 04
Note
OIf you select all the size format for time shift, you can not do any recording.
GWaiting for the system checking. And you can see the speed data after the success checking.
Note
OOnly have to format when you use the device for record for the first time.
Time Shift function is only available in DTV mode. Press PLAY/PAUSE to pause the program, and press PLAY/ PAUSE again, the time shift program will be played. If you want to stop time shift function, press the STOP button.
You can stop the time shift program being played by pressing the EXIT button.
RECORDING
APress D.MENU button to record the program being played, and press D.MENU or EXIT button to make the recording interface minimum.
BUSH 1080p Digital LED LCD User Manual Helpline: 0845 604 0105 | P.25 |
