Figure 2-6

Cylinder Mounting Bushing

2-3 DISMOUNTING LOADER

Dismount loader on firm, level ground to facilitate the next mounting. It is recommended that loader be stored in a dry place to prevent rusting.

A. Observe the position of boom cylinder mount-

ing bushing in relation to the subframe. (Figure 2-6) Remember this position to aid in aligning cross tube with front bracket when loader is being mounted to tractor.

B. Remove parking stands from storage. Raise boom and install as shown in Figure 2-7.

WARNING

DO NOT STAND UNDER LOADER WHILE REMOVING/INSTALLING PARKING STANDS.

Figure 2-7

Parking Stands Installed

Stands Pinned Into Place

11

Page 13
Image 13
Bush Hog 2347 QT manual Dismounting Loader