Bush Hog 2347 QT Table Of Contents, Retail Customer’S Responsibility Under The Bush Hog Warranty

2347 QT

TABLE OF CONTENTS

SECTION/PARA PAGE SECTION/PARA PAGE

	Warranty		2
	Dealer Preparation Check List		3
	Safety Precautions		4
	Federal Laws & Regulations		6
I	INTRODUCTION & DESCRIPTION		7
	1-1 Introduction		7
	1-2 Description		7
II	LOADER MOUNTING & DISMOUNTING...		9
	2-1 Preparing Tractors		9
	2-2 Mounting Loader		9
	2-3 Dismounting Loader		11
III	OPERATING INSTRUCTIONS		12
	3-1	General Safety	12
	3-2	Operation	12
	3-3	Bale Spear Operation	17
	3-4	Fork Lift Operation	18

	3-5 Quick Hitch Operation		18
	3-6 Transporting		18
IV	MAINTENANCE		19
	4-1 Maintenance Check List		19
	4-2 Lubrication		19
	4-3 Hydraulic System
		Pressure Requirements	19
	4-4 Troubleshooting		20
V	ASSEMBLY		21
	5-1 Mainframe Assembly		21
	5-2 Hydraulic Valve Stand Assembly		23
	5-3	Hydraulic Valve Plumbing	24
	5-4	Power Beyond Plumbing	25
	5-5	Fork Lift Option	26
	5-6	Bale Spear	26
	Safety Decals		27
	Torque Specifications		28

RETAIL CUSTOMER’S RESPONSIBILITY

UNDER THE BUSH HOG WARRANTY

It is the Retail Customer and/or Operator’s responsibility to read the Operator’s Manual, to operate, lubricate, maintain and store the product in accordance with all instructions and safety procedures. Failure of the operator to read the Operator’s Manual is a misuse of this equipment.

It is the Retail Customer and/or Operator’s responsibility to inspect the product and to have any part(s) repaired or replaced when continued operation would cause damage or exces- sive wear to other parts or cause a safety hazard.

It is the Retail Customer’s responsibility to deliver the product to the authorized Bush Hog Dealer, from whom he purchased it, for service or replacement of defective parts which are covered by warranty. Repairs to be submitted for warranty consideration must be made with- in forty-five (45) days of failure.

It is the Retail Customer’s responsibility for any cost incurred by the Dealer for traveling to or hauling of the product for the purpose of performing a warranty obligation or inspection.

UNDERSTAND SIGNAL WORDS

DANGER: Indicates an imminently hazardous situation which, if not avoid- ed, will result in death or serious injury. This signal word is to be limited to the most extreme situations.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially haz- ardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.

1