Once zoomed in on a picture, you are also able to navigate around the picture by pressing the display button. A yellow 4-way symbol appears in the corner of the LCD next to the magnification number, you then use the 4-way switch to move up, down, left or right as desired.

To see thumbnails of multiple pictures stored in the memory while in Review mode, push the “Display” Button. You may see up to 9 pictures at a time. You move through the thumbnails by using the Up, Down, Left and Right arrows on the 4-way switch. Press “Display” again to see a selected (highlighted) thumbnail as a full frame photo.

To exit from the Review mode, again press the “View” button. You are then back in Capture mode.

FORMAT: Formats a new or previously used SD card to enable storing photo files. Select OK and press MENU after inserting a card for the first time. Be sure the card has been inserted with the notched corner on the left as indicated below the card slot. Note that formatting a card will erase any photos previously stored on the card. Note: “MMC” cards are not compatible and should not be used.

PROTECT: Protects the currently displayed photo from accidental erasure. Pressing the MENU button will toggle between PROTECTED and UNPROTECTED. Once protected, a photo must be unprotected using this menu item before it can be deleted.

SETUP: Provides same options as SETUP in the previous “Record” mode menu-those items can also be accessed while in Review mode to change time/date stamp, beep on/off, etc.

EXIT: Returns to the regular Review mode (stored photos are displayed).

DELETING/PROTECTING PHOTOS AND FORMATTING A NEW SD CARD:

With the camera in the Review mode (press the View button if necessary), press the “MENU” button in the middle of the 5-way switch. This opens the menu that will allow you to perform the following actions: (use the 5-way switch and menu button as previously instructed to make choices from this menu, select or change settings, and return to the main menu)

DELETE: Erases photos from the internal memory, or from the SD card if you have inserted one before

LCD DISPLAY SYMBOLS (ICONS VISIBLE IN CAPTURE OR REVIEW MODE AS INDICATED)

CAPTURE

Full

Low 1) Battery Meter: Displays battery level

Dead

0222) Total Photos: Displays the total number of photos currently stored in internal or SD card memory.

022

3M Full

H

*M Low

**L

***Dead

beginning to shoot photos. You may choose:

One: deletes the currently displayed photo only-after pressing MENU to delete a photo, use the left/right arrow key to display the next photo you want to delete and repeat the process

All: deletes all photos held in the internal memory or SD card

Cancel: select if you decide not to delete a photo after entering this menu

3M

3)

Resolution Setting: “3M”: 2048×1536, “H”: 1600×1200, “M”: 1280×1024, “L”: 800×600

MH

L

4)

Image Quality: *** “Best,” ** “Better,” * “Standard

**

*

 

 

 

***

 

 

 

 

5)

Capture Mode: Normal (no icon), self timer (clock icon), sequential (multiple frame icon).

 

ON

 

 

6)

SD card: Displayed when a card is inserted.

6

7

Page 7
Image 7
Bushnell 11-0832 manual DELETING/PROTECTING Photos and Formatting a NEW SD Card, Low 1 Battery Meter Displays battery level