Bushnell 119833, 119935 K3 Flash Mode Switch LED / Standard, LED Mode Infrared LED lamp array

Note: see #4 in “Other Setup Notes” for additional information.

Setup Guide (cont.)

2.K2 – Image Mode Switch (STILL / MOVIE): Set K2 to either of these settings:

(UP) STILL Photo Mode: Image resolution is 3.0MP (119833), or 5.0MP (119935/119905) and photos are stored in JPG format.

(DOWN) MOVIE Mode: The camera can record a 15 second movie, the file format is AVI (with audio on models 119935/119905).

NOTE: On model# 119833, the combination of NIGHT mode and MOVIE mode will result in dark videos, as the xenon flash does not function in MOVIE mode. With models 119935/119905, you may use NIGHT and MOVIE modes together by setting switch K3 (Lighting mode) to the LED position (the standard xenon flash does not func- tion in MOVIE mode).

(Models 119935/119905 only)

3. K3 - Flash Mode Switch (LED / Standard):

The Game camera has two modes that select which flash type will fire under dark conditions:

(a) LED Mode (Infrared LED lamp array):

The IR-LED (infrared) light is invisible to the naked eye, but will provide illumination for the camera, use it when you do not want to alert the subject at night. This mode can also be used for nighttime movie capture. During the time defined as “Night”, an infrared blocking filter is automatically deactivated, so that the IR light generated by the LEDs can create an image. During the “Day”, the infrared blocking filter is re-activated; therefore, you should use the “Standard” or xenon flash position for best results when the camera is set to “Day only” time mode.

(b) STD (Standard) Mode: (Xenon flash tube) Note: this switch position may be labeled “Incand” rather than “STD” on some early production units.

You can use Standard mode for twilight/cloudy conditions, or to take color still pictures at night. If

12you want to use the MOVIE mode, you can not use Standard flash mode—you must set K3 to LED.