AUDIO & RECORDING JACKS

The jacks on the back, left side of the radio are for audio input (AUX IN), audio output (LINE OUT) and a timer activation switch .

 

 

 

AUX IN Jack

 

 

RECORDING ACCESSORY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VersaCorder

 

 

 

 

 

 

 

 

Designed to work

 

 

 

 

 

Timer Activation Switch

 

 

 

 

 

with the CCRadio

 

 

 

 

 

 

 

 

 

 

 

 

 

LINE OUT Jack

 

plus. Record up to

4 hours

 

 

 

 

 

on one side of a cassette.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(See page 23 for details.)

 

 

 

 

 

 

 

 

 

 

AUX IN JACK

The green jack, labeled AUX IN is used to connect an external audio source such as a CD Player or recorder, so you can listen through your CCRadio plus’ speaker. To do this, you will need the appropriate patch- cord. (Refer to page 23 for patchcord specifications).

Warning: If a “LINE OUT” is not available on your external audio source, you can use the headphone jack. However, the volume must be kept low or damage to the CCRadio plus may result.

1)Plug your patchcord into the LINE OUT or Headphone Jack of your external audio source.

2)Plug the other end into the AUX IN jack on the CCRadio plus.

3)With the power on, press and hold the Band/AUX Button until you hear a short beep and AUX appears on the display.

4)Turn on your external audio source to hear the audio played through the CCRadio plus.

5)To turn the AUX off, press the Band/AUX Button again and the AUX will disappear from the display.

NOTE: Volume can be controlled from the CCRadio plus.

LINE OUT JACK

The red jack, labeled LINE OUT, is used to output the audio from the CCRadio plus to another device such as a recorder, your home stereo, or some other unit. To do this, you will need an 1/8” stereo patchcord.

Note: The LINE OUT jack differs from a headphone jack because the volume level of a headphone jack varies depending on the volume of the radio. The LINE OUT jack has a set line level so the volume is con- sistent no matter what the position of the volume knob.

1)Plug your patchcord into the LINE OUT jack on the CCRadio plus.

2)Plug the other end of the patchcord into the LINE IN or AUDIO IN of the device you want to send the audio to and you will hear the radio

Page 17

Page 17
Image 17
C. Crane CCRadio plus instruction manual AUX in Jack, Line OUT Jack