DISPLAY LIGHT

DISPLAY LIGHT ON AC POWER

When the radio is plugged into AC power, the display light will always be on unless you turn it off. The special green LED bulbs last about

100,000 hours and use very little electrical energy. If you want to turn off the display light, press the Light button. Refer to page 7 for button identification.

DISPLAY LIGHT ON BATTERIES

When batteries are used the display light can be turned on by pressing the light button. The display light automatically goes off two minutes after the last time you press any button.

LOCK SWITCH

The Lock switch can be used when transporting the radio to prevent accidentally turning it on. When the switch is pushed up you will see the

Lock symbol appear on the display. It can also be used to disable all functions of the radio when it is turned on. Push the switch down to release the lock.

Lock Switch

 

Headphone

HEADPHONE JACK

Jack

 

 

Right Side View

 

You can use a stereo or mono headphone with a 3.5 mm plug. When you insert the headphone plug, the speaker is disconnected. This radio receives FM in stereo through the headphones.

RESET BUTTON

Once in awhile glitches may occur on any portable digital radio. This can be caused by static electricity, unusual key strokes or a power disrup- tion. If this happens, use the end of a paper clip or ball point pen and push it into the hole briefly to reset the radio. You will lose the clock time, and all the stations stored in memory when the radio is reset.

Reset Button

Bottom View of CCRadio plus

Page 16

Page 16
Image 16
C. Crane CCRadio plus instruction manual Display Light, Lock Switch, Reset Button