C. Crane CCRadio plus O PTIONAL N

Page 20

light will extend up to 12’.Just pull on the connector and unreel it to the

desired length.The black base of the light opens up to reveal a handle

that is used to reel the cord back in.The base is also a magnet, so you

can mount it to any metal surface like a refrigerator or a car.

Please note: All NiCad batteries come slightly charged. First, charge the

(4) ‘D’NiCad batteries. You can do this in the CCRadio

plus

via the 6V

Adapter or with the 4 Watt Solar Panel.To install the batteries please

refer to page 9.

Please read the NiCad Information on page 21 to ensure you get the

best service from your NiCad batteries.

To charge the batteries via the adapter, plug the 6V Adapter into the jack

labeled “6V DC Charging Circuit”on the back of the CCRadio

plus

.Once

the batteries are charged you may use the radio.To use the light, plug it

into the jack labeled “LED Lamp”.

To charge the batteries via the Solar Panel,

plug the panel into the jack

labeled “6V DC Charging Circuit”.The NiCads will charge via the Solar

Panel every time it is in full or partial sunlight.The Solar Panel can be

mounted outside.There is a voltage blocking device in the radio that

prevents loss of a charge when the Panel is not in the sun.Generally,

the Solar Panel puts out equal power required to run the radio.If you

charge the batteries for eight hours in the full sun you may get nearly

eight hours of play time.The CCRadio

plus

can be operated while the

batteries are being charged. The Solar Panel will run the radio in full

sunlight without the NiCad batteries installed.

6V DC

Charging Circuit

OPTIONAL NICAD BATTERY CHARGING SYSTEM

NEVER

CHARGE

ALKALINE

BATTERIES WITH

6V DC CHARGING ADAPTER

SOLAR PANEL