Cable Electronics HSW44C instruction manual Hsmr

HSMR

1

2

3

8

4 7

6

5

1.Source LED: Indicate input source

2.IN: Push button for switching input source channel in sequential order

3.EQ: Adjust the 8-level equalization control for HDMI signals. 0 – 7 = strongest – weakest. It is recommended to switch from 7 to 0 to find the optimal visual experience.

4.HDMI Out: Connect to HDTV with a HDMI cable

5.IR: Plug in IR receiver cable

6. 5V DC power jack [optional*]

7.RJ-45 Input: TMDS channel [connect to TMDS channel of OUT1 to OUT4 on HSW44C]

8.RJ-45 Input: DDC channel [connect to DDC channel of OUT1 to OUT4 on HSW44C]

*The HSMR has been tested extensively and found that it doesn’t require external power supply. If in rare situation you find it cannot work with the HSW44C, please use any +5V power adapter to plug in the power jack and see if it can work. If not, please contact your technical support for further service.

6