2Open: Open the COM port after scan to establish the connection between PC and the matrix.

3Close: Release the COM port after scan.

4Quick Setup Buttons: Provide the fast setup between inputs and outputs of the matrix. “Default” button makes input 1, 2, 3, 4 mapped to output 1, 2, 3, 4 respectively. “Channel 1” makes all outputs see input-1, same for the remaining buttons.

5Output Channel Setup: Click on this button, a quick selection table of inputs will show up. Users can therefore easily select the input video for each output.

6Input Channel Setup: The button will bring up the setup window for the inputs as below.

A

B

C

AInput Channel: Select the input channel to do bitmap and label change.

BBitmap Path: Select the figure for each channel. Notice that only pictures in BMP format are supported.

CDescription: Channel description.

15

Page 16
Image 16
Cable Electronics HSW44C instruction manual