EXAMPLE NETWORKS
90 CyberSWITCHFinally, you’ll see this screen:When you’ve completed the configuration of both interfaces , you’ll see a summary screen similar to the following:SAP Send Control:
1) Do Not Send.
2) Send.
Enter a SAP Send Control from the above menu [default = 2]? 1
SAP Receive Control:
1) Do Not Receive.
2) Send.
Enter a SAP Receive Control from the above menu [default = 2]? 2
SAP Respond Control:
1) Do Not Respond.
2) Send.
Enter a SAP Respond Control from the above menu [default = 2]? 2
Current Configuration for INTERFACE “remotelan”:
Interface Type WAN (Remote LAN)
IPX Network Number 0128
MTU (bytes) 1497
Encapsulation Ethernet 802.2
RIP Configuration:
Send Control Do Not Send
Send Frequency 60 seconds
Receive Control Receive
RIP entry aging time 180 seconds
Respond Control Respond
SAP Configuration:
Send Control Do Not Send
Send Frequency 60 seconds
Receive Control Receive
SAP entry aging time 180 seconds
Respond Control Respond
Are you sure you want to add the INTERFACE "remotelan" (Y or N) ?
<Y>
IPX INTERFACE Menu:
id Name Type Address
1 detroitlan LAN 0100
2 remotelan WAN (Remote LAN) 0128
(1) Add, (2) Change, (3) Delete, (4) Display an INTERFACE
or <RET> for previous menu: