Cabletron Systems manual To install the BRIM-F6 ribbon cable

CHAPTER 2: INSTALLATION

To install the BRIM-F6 ribbon cable:

1.Insert one ribbon cable connector into the ribbon cable jack on the BRIM. (See Figure 2-4.)

	Tab
Ribbon	Groove
Cable
Connector

Ribbon

Cable

Jack

Figure 2-4. Installing the BRIM-F6 Ribbon Cable

Caution: The ribbon cable connector only fits into the ribbon cable jack one way. Fit the tab on the connector into the groove in the jack for correct cable orientation.

2.Press down on the connector until the clips on the jack snap into a vertical locked position.

Page 2-6 BRIM-F6 User’s Guide