INSTALLATION
•Carefully remove the adapter from its protective pouch, and visually inspect it.
•Remove the backplate (2, Fig. 2-6) from the selected slot (3) by removing the screw (1) holding the backplate in place, and sliding the backplate out of the slot as shown in Figure 2-6.
Carefully insert the adapter into the expansion slot as shown in Figures 2-7 and 2-8. Orient the adapter (1) so the PC edge bus connector (2) is pointed down and the ports face out the back of the PC. Align the adapter so the PC bus edge connector is lined up with the expansion slot (3), and firmly press, but do not force, the adapter into the slot.
| | 1 | |
3 | 2 | 1. | Screw |
| |
| | 2. | Backplate |
| | 3. | Expansion Slot |
Figure 2-6. Backplate Detail
