Cabletron Systems E3100, E2100, E1100 manual Clip Adapter Edge Connector Expansion Slot

INSTALLATION

•Align the adapter so the PC bus edge connector is lined up with the expansion slot (4) as shown in Figure 2-11.

1

5 2

3

1. Clip

42. Adapter

3. Edge Connector

4. Expansion Slot

5. Clip

Figure 2-11. Installing the E3100 Series Adapter

•Slide the adapter into the guide slots and firmly press, but do not force, the adapter into the expansion slot. The plastic clips on the adapter (1, 5, Figure 2-11) will snap into place as the adapter is inserted into the expansion slot.

•Reinsert the thumbscrew, and replace the PC cover. Reattach the power and peripheral cables, and power up the PC.

Page 2-13