8
Installation Assembly/
Installing the Transformer
All grills with electrical components such as lights or a convection fan will require the transformer to be installed and plugged in before you can use it. This needs to be done before the grill is inserted in the island or modular cart. When the transformer is attached to the grill chassis, use care in placing the grill in the island cutout to avoid hitting the transformer.
1.Remove the transformer and the metal screws from the plastic bag.
2.Place the grill on a sturdy surface and tilt it back to show the underside of the grill.
3.Using the metal screws, attach the transformer to 4. When you have firmly tightened the screws and
the left side of the grill near the internal electrical | nuts, connect the plug from the transformer to | |
connection. Attach the metal plate to the outside | the grill. Screw on the stainless steel retainer. | |
surface of the grill as shown in the figure below. |
| |
|
|
|
|
|
|
2009 Barbecue Grills and Carts
www.calspas.com | LTR20091038, Rev. A |
