10

Installation Assembly/

Installing Side Burners

1.Assemble a 3/8” pipe nipple to the 3/8” pipe tee using Teflon tape or pipe sealant. Use only sealant that is approved for use on LP gas.

2.Install the pipe tee assembly to the grill intake pipe. Tighten assembly and align the branch opening of the tee with the hole of the cabinet.

Items Included with Barbecue

1)"T" adapter (3/8")

2)2 each Hose 3/8" Fittings

3)Regulatorw/ Hose

"T" Adapter (3/8" Threaded)

 

To grill, located

To side burner, located

underneath and

behind grill

underneath behind burner.

From Grill

From Side Burner

 

3/8" Fittings

To Propane Tank

NOTE: You will need to use a gas rated

sealer on gas connectors that are not flared.

3.Connect the flexible hose (male end) to the pipe tee.

4.Install and secure the side burner into the island by simply setting it in place.

5.Connect the female end of the flexible hose to the side burner intake pipe.

6.Connect gas supply to the grill.

7.Check for gas leaks using soap water solution.

AOpen barbecue door. Install hose with regulator on propane tank. Then connect other end to "T" adapter. Make sure to use gas rated tape seal when installing adapter to insure proper seal.

C

Grill B

A

BThen take other end of "T" adapter with hose attached and connect to end of male located underneath and at the back of the grill. (Use gas rated tape seal on all connections).

CConnect the last open line to the side burner (Use gas rated tape seal on all connections)

GAS LINE

2009 Barbecue Grills and Carts

www.calspas.com

LTR20091038, Rev. A

Page 12
Image 12
Cal Flame Barbecue Grills & Carts manual Installing Side Burners