Cambridge Audio 650BD user manual Front panel display

azur 650BD

Front panel

ENGLISH

5

4

1 2 3 6 7 8 9

1Standby/On

Switches the unit between Standby mode (indicated by a dim power LED) and On (indicated by a bright power LED). Standby is a low power mode where the power consumption is less than 1 watt. The unit should be left in Standby mode when not in use.

2USB port

Port for interfacing to a flash/memory card or "Mass Storage Device".

Notes:

Front panel display

1 2 3 2 4 5 6 7 8 9

10 11 12 13

•Only USB 2.0 certified products with the USB 2.0 logo on them are supported by the 650BD. Please either consult the manufacturer of the USB 2.0 product to make sure it is properly certified, or go to www.usb.org for a list of approved products. We cannot be held responsible for any incompatibility issues.

•This unit supports "USB Mass Storage Class Bulk-Only Transport" devices only. Most USB thumb drives, portable hard disk drives and card readers conform to this device class. Other USB devices such as MP3 players, digital cameras, and mobile phones may not be compatible.

•Supported USB drives must be formatted with the FAT (File Allocation Table) or FAT32 file system. Drives formatted with NTFS file system are not supported.

3IR sensor

Receives IR commands from the supplied Azur Navigator remote control. A clear unobstructed line of sight between the remote control and the sensor is required.

4Display

Used to display the 650BD’s functions and playback state, etc. Please refer to the front panel display section at right for more information.

5Disc tray

Use the Open/Close button to activate.

6Open/Close

Allows you to open and close the disc tray for loading of discs. Pressing Play will also close the tray and start playing a disc if one is loaded.

7Play/Pause

Plays the disc and pauses (freezes) playback.

8Stop

Press once to stop playback. Pressing Play will cause the playback to be re-started from the same position. Press Stop again to fully stop playback.

9Skip

Press once to skip between tracks/chapters.

1.Disc Type Indication – Indicates the currently playing disc type.

2.Track/Chapter – When illuminated, the displayed time applies to a track or chapter.

3.Title/Group – When illuminated, the displayed time applies to a title or group.

4.Total – When illuminated, the displayed time is the total play time.

5.Remaining – When illuminated, the displayed time is the remaining play time.

6.Playback Status – Indicates playback status such as Play, Pause, Repeat, Repeat All, Random/Shuffle, and A-B Repeat.

7.Angle Icon – Indicates that the scene contains additional camera angle(s) that can be selected.

8.HDMI – Indicates that the HDMI output is active.

9.Network – Indicates that the unit is connected to a network.

10.Mute Icon – Indicates that the audio is muted.

11.Audio Channel Indication – Indicates whether the audio is 2ch stereo or multi-channel surround.

12.Main Display – Text messages and numeric display.

13.Audio Type Indication – Indicates the type of audio tracks playing.

9