SAFETY PRECAUTIONS
Before laying cable or installing an Incognito system it is important that you check and comply with all building regulations or building code applicable to your country, state or area. If you are in any doubt contact your local building regulations/code officer and/or seek professional advice from a suitably qualified person.
Read instructions – All the safety and operating instructions should be read before the product is operated.
Retain instructions – The safety and operating instructions should be retained for future reference.
Heed warnings – All warnings on the product and the operating instructions should be adhered to.
Follow instructions – All operating and use instructions should be followed.
Cleaning – Unplug all system components from the wall outlet before cleaning any part of the system. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Attachments – Do not use attachments which are not recom- mended by the manufacturer as they may cause hazards.
Water and moisture – Do not install the AH10/PS10 near water – for example, near a bath tub, wash bowl or kitchen sink; in a wet basement, or near a swimming pool etc.
Wall or ceiling mounted loudspeakers – should be mounted to a wall or ceiling only as recommended by the manufacturer. Installer's should also ensure that all building regulations are strictly adhered to as cutting a hole for a loudspeaker may affect the fire rating of a ceiling or wall.
Accessories – Do not install any part of the system on an unstable surface, stand, bracket or table. The product may fall, causing serious injury to child or adult, and serious damage to the product. Use only a surface, stand bracket or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer.
A product and stand combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the combi- nation to overturn.
Ventilation – Slots and openings in the cabinets/enclosures are provided for ventilation and to ensure reliable operation of the product and to protect them from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a soft surface. The AH10 should not be placed in a
Power sources – The PS10 should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.
Grounding or polarization – In some countries the PS10 may be equipped with a polarized
4Incognito
