Cambridge Audio Multi-room speaker system manual Audio Connections, PS10 power supply to AH10

AUDIO CONNECTIONS

PS10 power supply to AH10

SS10

Speaker cable

KP10

SS10

Speaker cable

For each AH10 with up to four main zones connected (and no sub- zones) one PS10 is required.

Sub-zones require a separate PS10 power supply.

For each AH10 (with both main and sub-zones connected) two x PS10 power supplies are required.

AH10 to KP10

Using a single Cat-5e cable, connect each KP10 to the AH10 via an RJ45 plug using the EIA/TIA 568A wiring standard (see below) at the AH10, and an eight-way colour-coded connection at the keypad.

Cat5	Cat5
PS10

Connections for one AH10 with two main zones attached

1	– white/green	5	– white/blue
2	– green	6	– orange
3	– white/orange	7	– white/brown
4	– blue	8 – brown

The Cat-5 connection from AH10 to KP10 should not exceed 30m/ 100 ft.

Sub-zones connections are made in the same way as main zone connections but from the sub-zone sockets (see illustration on page 9).

KP10 to SS10 or other loudspeakers

Connect the KP10 to a pair of speakers with two runs of standard high-quality speaker cable.

6Incognito multi-room