Camco 4, 2.6 manual Subject to technical alterations without prior notice

7.0 SPECIFICATION

Frequency Response	20 Hz - 20 kHz ± 0,15 dB
	8 Ω load, 1 dB below rated power
Input Impedance	40 kΩ balanced
Voltage Gain	selectable: 26 dB, 32 dB, or 1,4 V input sensitivity
Protection Circuits	inrush-current limitation, protection circuits against power on/off
	transients, temperature monitoring of transformers and heat-sinks,
	output DC protection, power transistor control, temperature dependent
	SOA protection, intelligent mains fuses protection
Limiter	switchable peak-limiter
Fan	2 temperature dependent speed-controlled axial fans
Ground-Lift	input ground-lift switch on back panel
Indicators	LED’s for ON, SIGNAL, CLIP, indicating additionally Output Current and faults
	for example like DC and High Temp
Input Connectors	3-pin XLR, male and female per channel, pin 2 = inphase
Output Connectors	one 4-pole SPEAKON connector for each output channel
	(bi-amping possible)
Modes of Operation	STEREO, BRIDGE MONO and PARALLEL-MONO
Options	Extended User Interface / E.U.I. - modules for any kind of EQ
THD+N (typical)	< 0,01 %
20 Hz - 10 kHz, 8 Ω load
3 dB below rated power
SMPTE (typical)	< 0,01 %
20 Hz - 20 kHz, 8 Ω load
3 dB below rated power
Damping Factor	> 400
8 Ω load, 1 kHz and below
Dimensions (WxHxD)	483 x 88,9 x 420 mm (19”, 2U)
Net Weight	12,4 kg
Shipping Dimensions (WxHxD)	600 x 600 x 205 mm (0,074 m3)
Shipping Weight	15 kg
	Subject to technical alterations without prior notice

P.27	CAMCO USER MANUAL
	VORTEX POWER AMP SERIES