General Safety Information (Cont’d.)
8.Use steady, even pressure when using tool. Do not force. Too much pressure can cause blade to break or overheat.
9.Keep all nuts, bolts and screws tight and ensure equipment is in safe working condition.
10.Do not put hands near or under moving parts.
WORK AREA
Do not operate a ! WARNING power tool in an
explosive atmosphere, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the fumes or dust.
Keep work area
! CAUTION clean and well lighted. Cluttered benches and dark areas invite accidents.
Keep bystanders,
! CAUTION children, and visitors away while operating a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
Double insulated tools are equipped with a polarized plug (one plug blade is wider that the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, turn the plug over and insert into plug again.
Do not expose
! WARNING power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
Avoid body contact
! WARNING with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded.
! WARNING Do not abuse cord.
•Never carry tool by its cord.
•Never pull the cord to disconnect from receptacle.
1.Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
2.Do not use an extension cord unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electric
shock. If an extension cord must be used, make sure:
•That the pins on plug of extension cord are the same number, size and shape as those of plug.
•That the extension cord is properly wired and in good electrical condition.
•If an extension cord is to be used outdoors it must be marked with the suffix “W-A” or “W” following the cord type designation to indicate it is acceptable for outdoor use.
For example – SJTW-A
3.Do not expose to rain, snow or frost.
PERSONAL SAFETY
Do not misuse this
!WARNING product. Excessive exposure to vibration, work in awkward positions, and repetitive work motions can cause injury to hands and arms. Stop using any tool if discomfort, numbness, tingling, or pain occur, and consult a physician.
1.Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.
Avoid accidental ! CAUTION starting. Be sure
switch is in the locked or off position before making any adjustments, changing accessories, or storing the tool. Carrying tools with your finger on the switch with the switch on invites accidents.
2. Remove adjusting keys or wrenches before turning on the tool. A key or wrench attached to a rotating part of the tool may result in personal injury.
3. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enable better
control of the tool in unexpected situations.
4. Always work in a well- ventilated area. Wear an OSHA-approved dust mask and safety glasses.
5.Hold tool by insulated gripping surface when performing an operation where the tool may contact hidden wiring. Contacting a “live” wire will make exposed metal parts of the tool “live” and shock the operator.
6.Keep hands away from moving parts.
7.Use clamps or another practical way to secure the workpiece to a stable platform. Never hold work in your hand, lap, or against other parts of your body when cutting.
8.Always use blades of the correct size and shape mounting holes. Blades that do not match the mounting hardware of the saw will increase risk of injury to the user and damage to the tool.
TOOL USE AND CARE
Do not use tool if
! WARNING switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired.
1.This tool must NOT be modified or used for any application other than that for which it was designed.
Do not force the
! CAUTION tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.
2. Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control.
3. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.
4. Use only accessories that are recommended by the manufacturer for your model. Accessories suitable for one tool may create a risk of injury when used on another tool.
5. Some wood contains preservatives which can be toxic. Take extra care to prevent inhalation and skin contact when working with these materials. Request and follow all safety information available from your material supplier.
