HV1000, HV1500 and HV2000 series
General Safety (Continued)
•Do not carry TURBINE while spraying.
•Keep the turbine at the maximum dis- tance from the spraying area.
•Static electricity can be produced by HVLP spraying. Make sure any electri- cally conductive object being sprayed is grounded to prevent static sparking. The sprayer is grounded through the electric cord. If an extension cord is necessary, the cord must be a ground- ed, 115 volt, three wire type cord.
•Hazardous vapors: Paints,
solvents, insecticides, and other materials may be harm- ful if inhaled, causing severe nausea, fainting, or poison- ing.
•Always wear a mask or res- pirator and eye protection
when painting. Be certain mask or respirator will pro-
vide necessary protection
against inhalation of harmful vapors.
•NEVER point the spray gun at any part of the body, or at anyone else.
!CAUTION
•Tipping the gun may cause the gun to clog. Dried spray material clogs the pressure delivery tube and fittings. The spray gun does not function when clog- ging occurs.
•When not in use, be sure to discon- nect the hose and place the gun on a solid, level surface or in the turbine gun storage area to avoid tipping.
GROUNDING INSTRUCTIONS
This product must be properly ground- ed. In the event of an electrical short circuit, grounding reduces the risk of electrical shock by providing an alter- nate path for the electrical current.
This product is equipped with a cord that has a ground wire and an appro- priate ground plug. Plug the unit into an outlet that is properly installed and grounded in accordance with local codes and ordinances.
! DANGER
Improper installation of the ground plug can result in the risk of electrical shock. If
repair or replacement of the plug or cord is necessary, consult an authorized service provider.
1.For any questions regarding proper installation of the ground plug, consult a qualified (licensed or cer- tified) electrician.
2.Do not modify the plug provided. If the plug does not fit the outlet, have the proper outlet installed by a qualified electrician.
3.This product is for use on
a nominal
the plug in Figure 2.
Make sure that the product is con- nected to an outlet having the same configuration as the plug. No adapters should be used with this product.
4.If an extension cord is required, use only a three wire extension cord that has the same configuration as the unit cord, including the (round) ground terminal. Make sure that the extension cord is plugged into a properly grounded receptacle.
3
www.chpower.com
