112
■Cleaning tape
Use the TZ-CL6 cleaning tape with a tape
width of 1 1/2" (36 mm) (sold separately) to
clean the PT-9500PC easily.
1Press the cover release button and open
the tape compartment cover.
2Remove the tape cassette and install the
cleaning tape.
3Close the tape compartment cover.
4Press the feed/cut button.
→Cleaning will start.
5Press the cover release button and open
the tape compartment cover.
When the rollers stop, press the cover
release button.
6Remove the cleaning tape, reinstall the
tape cassette, and then close the tape
compartment cover.
Cleaning the cutter
If the printed labels are not ejected from the
PT-9500PC correctly, clean the cutter for
cutting the labels.
1Turn off the PT-9500PC.
2Press the cover release button and open
the tape compartment cover.
3Remove the tape cassette.
4Use a cotton swab to clean the cutter.
Note
●For further details on using the cleaning
tape, refer to the instruction manual
included with the cleaning tape.
Cutter blade
Cotton swab
Metal section