Brother PT-9500PC manual Using as a network printer

cSelect “Yes, I want to restart my computer now.”, and then click [Finish].

→Installation of the printer driver is complete, and the personal computer will restart.

Note

●When the USB interface cable is connected to the PT-9500PC, the serial port cannot be used for communication. Remove the USB interface cable from the PT-9500PC.

●When using a personal computer that does not support a serial port baud rate of 115,200 bps, change the PT-9500PC

baud rate to 9,600 bps. For details, refer to “Changing the baud rate” (→ P.109).

■Using as a network printer

This section contains the procedures to install the printer driver when using the PS-9000 print server (sold separately) designed exclusively for the P-touch series printers. When using the PS-9000 print server, the PT-9500PC can be used as a network printer. This function can only be used in a Windows environment.

PS-9000

Ether

HUB

Ether cable

USB cable

Note

●For PS-9000 setup, refer to the instruction manual for the PS-9000 print server.

Installing the software

43