Brother PT-9500PC manual After printing, Removing the label backing

After printing

This section contains the procedures to remove the label backing from the printed label to remove.

Removing the label backing

When the backing of a printed label is not cut, use the included label stick. For labels printed using the Half Cut option, peel back the backing from the cut line.

1Press the cover release button and open the tape compartment cover.

2Remove the label stick installed inside the PT-9500PC tape compartment cover.

3Hold one end of the printed label with one hand and hold the label stick with the other hand.

4Insert half of the printed label into the hole in the label stick with the printed side facing up.

5Turn the label stick and quickly pull as shown in the illustration below.

Windows version

Creating labels:

→The end of the label will come off of the backing slightly.

6Completely remove the backing from the label and affix the label.

91