6GENERAL PRECAUTIONS
■P-touch 9500PC
●The PT-9500PC is a precision machine. Do not drop the PT-9500PC or subject it to strong shocks.
●Do not grab and lift the PT-9500PC by the tape compartment cover. The cover could come off and the
PT-9500PC could drop and be damaged.
●The PT-9500PC may malfunction if left near a television, radio, etc. Do not install the PT-9500PC near
any machines that will cause electromagnetic interference.
●Keep the PT-9500PC out of direct sunlight.
●Do not use the PT-9500PC in extremely dusty areas, in areas with high temperatures or high humidity,
or in areas where the PT-9500PC may freeze. The PT-9500PC may malfunction or stop operating.
●Do not clean the PT-9500PC with thinner, benzene, alcohol, or other organic solvents. The PT-9500PC
finish may come off and the PT-9500PC case may be damaged. If dirty, c lean the PT-9500PC with a soft,
dry cloth.
●Do not leave any rubber or vinyl on top of the PT-9500PC for an extended period. The PT-9500PC may
be stained.
●Do not place any heavy objects or objects containing water on top of t he PT-9500PC. If water or any
foreign object enters the PT-9500PC, contact the retail outlet where the PT-9500PC was purchased or
your local authorized service center. If you continue to use the PT-9500PC with water or a foreign
object in the PT-9500PC, the PT-9500PC may be damaged or personal injury could result.
●Do not touch the cutter. Personal injury could result. Take special care when the tape compartment
cover is open when changing the tape.
●Do not insert any objects into or block the label outlet, AC adapter jack, USB port, or serial port.
●Do not touch any metal parts near the print head. The print head is very hot during use and immediately
after use. Do not touch directly with your hands.
●Use only the interface cables (USB interface cable, serial interface cable) included with the PT-9500PC.
●Use only genuine Brother accessories and supplies. Do not use any unauthorized accessories or
supplies.
■AC adapter
●Use only the AC adapter included with the PT-9500PC.
●If the PT-9500PC will not be used for an extended period, remove the power supply cord from the
electrical outlet.
■Tape (tape cassette)
●Use only Brother TZ tapes or Brother/Avery AV labels with this machine. Do not use tapes that do not
have the or mark.
●Do not pull on the tape, otherwise the tape cassette may be damaged.
●If the label is attached to a wet, dirty, or oily surface, it may peel off easily. Before affixing the label,
clean the surface where it will be affixed.
●Depending on the environmental conditions and the material, condition, roughness, and shape of the
affixing surface, part of the tape may not be affixed properly or the l abel may peel off.
●In order to test the adhesive strength of the label or b efore using the label where safety is a particular
concern, test the label by affixing a small piece of it to an inco nspicuous area of the intended surface.
●If the label is used outdoors, ultraviolet rays, wind, and rain may cause the color of the label to fade and
the ends of the label to peel off.
●Markings made with oil-based or water-based ink may b e visible through a label affixed over them. To
hide the markings, use two labels layered on top of each other or use a dark-colored label.
●Do not use empty tape cassettes.
●Do not expose the tape cassettes to direct sunlight, high temperatures , high humidity, or dust. Store in a
cool, dark place. Use the tape cassettes soon after opening the tape cassette package.
●Note that Brother Co., Ltd. does not assume responsibility for an y damage, etc. arising from failure to
follow the precautions listed.
●Avery® is a registered trademark of AVERY DENNISON CORPORATION .