Portable Oxy-Fuel Welding and Cutting Outfit

Troubleshooting Chart

 

 

Symptom

Possible Cause(s)

Corrective Action

 

 

 

 

 

 

 

 

 

Welding Tip Popping

1. Tip is too large

1. Use next smaller size tip

 

 

 

 

2. Tip too close to work

2. Raise tip slightly farther from work

 

 

 

 

 

 

 

 

 

Flames are not clearly

Dirty tip

Clean with tip cleaner or replace the tip

 

 

 

defined

 

 

 

 

 

 

 

 

 

 

 

Cutting tip popping

1. Tip loose

1. Tighten tip nut

 

 

 

 

2. Seat is nicked

2. Replace tip

 

 

 

 

 

 

 

 

 

Flame changes during

1. Oxygen needle valve on torch

1. Open oxygen valve completely

 

 

 

cutting operations

handle partially closed

 

 

 

 

 

2. Oxygen cylinder depleted

2. Replace empty cylinder with full cylinder

 

 

 

 

 

 

 

 

 

Flame burns with shrill or

Flashback

Immediately turn torch off. Consult Operation section

 

 

 

hissing noise

 

 

 

 

 

 

 

 

 

 

 

Flame goes out with a

Backfire

See Operation section

 

 

 

loud pop

 

 

 

Limited 5-3-2 Warranty

1.Duration: The manufacturer warrants that it will repair, at no charge for parts or labor, the Torch, Regulators, or Hose, proven defective in material or workmanship, during the following time period(s) after date of original retail purchase:

For 5 Years: The Torch and Cutting Attachment

For 3 Years: Regulators

For 2 Years: Hose, Welding Tips, Heating Attachments

2.Who Gives This Warranty (Warrantor): Campbell Hausfeld

AScott Fetzer Company 100 Production Drive Harrison, OH 45030 Telephone: (513)-367-4811

3.Who Receives This Warranty (Purchaser): The original purchaser of the Campbell Hausfeld product.

4.What is covered under this warranty: Defects in material and workmanship which occur within the duration of the warranty period.

5.What is not covered under this warranty:

A.Implied warranties, including those of merchantability and FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THIS EXPRESS WARRANTY. After this period, all risks of loss, from whatever reason, shall be on the purchaser. Some states do not allow limitations on how long an implied warranty lasts, so above limitations may not apply to you.

B.ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT FAILURE OR MALFUNCTION OF THE CAMPBELL HAUSFELD PRODUCT. Some states do not allow limitations on how long an implied warranty lasts, so above limitations may not apply to you.

C.Any failure that results from accident, purchaser’s abuse, neglect or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied with the product.

D.Pre-delivery service, i.e. assembly and adjustment.

7.Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor’s option, products or components which have failed within duration of the warranty period.

8.Responsibilities of purchaser under this warranty:

A.Deliver or ship the Campbell Hausfeld product or component to Campbell Hausfeld. Freight costs, if any, must be borne by the purchaser.

B.Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).

9.When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.

This Limited Warranty gives you specific legal rights and you may also have other rights which vary from state to state.

www.chpower.com

10

Page 10
Image 10
Campbell Hausfeld WT5000 operating instructions Limited 5-3-2 Warranty, Troubleshooting Chart