The camcorder is connected using the optional
-Disconnect the
The computer doesn't recognize the camcorder even though the camcorder is connected correctly.
-[USB SETTING] is set to [DVD BURNER]. Set it to [PC/PRINTER] or to [CONNECT&SET] ( 94).
-Disconnect the USB cable and turn off the camcorder. After a short while, turn it on again and restore the connection.
The printer is not working even though the camcorder and printer are connected correctly.
-[USB SETTING] is set to [DVD BURNER]. Set it to [PC/PRINTER] or to [CONNECT&SET] ( 94).
-Disconnect the USB cable. Turn the printer off and then on again and restore the connection.
The camcorder doesn't recognize the
List of Messages (in alphabetical order)
related messages ( 106) and for messages that appear only when using the optional
Following the DOlist of messages for the camcorder you can find separate lists for print-
A ESSING THE ARD N T REM VE THE CARD
- You opened the memory card slot cover while the camcorder was accessing the memory card or the camcorder started accessing the memory card as you opened the memory card slot cover. Do not remove the memory card until this message disappears.
BA K UP RE ORDINGS REGULARLY
-This message may appear when you turn on the camcorder. In the event of a malfunction, recordings may be lost so back up your recordings regularly.
BUFFER OVERFLOW RECORDING WAS STOPPED
-The data transfer rate was too high for the memory card in use and the recording was stopped. Replace the memory card with one rated Speed Class 2 or higher.
- The
-The
CANNOT ACCESS THE
CANNOT COMMUNICATE WITH THE BATTERY PACK CONTINUE USING THIS BATTERY PACK?
- You attached a battery pack that is not recommended by Canon for use with this camcorder.
101