Cannon HF10 Condensation, TO AVOID, CONDENSATI, WHEN ONDENSATION IS DETECTED

Condensation Using the Camcorder Abroad

Moving the camcorder rapidly between hot and cold temperatures may cause condensation (water droplets) to form on its internal surfaces. Stop using the camcorder if condensation is detected. Continued use may damage the camcorder.

Condensation may form in the following cases:

•When the camcorder is moved quickly from cold to warm places

•When the camcorder is left in a humid room

•When a cold room is heated rapidly

Power Sources

You can use the compact power adapter to operate the camcorder and to charge battery packs in any country with power supply between 100 and 240 V AC, 50/60 Hz. Consult a Canon Service Center for information on plug adapters for overseas use.

Playback on a TV Screen

You can only play back your recordings on TVs compatible with the PAL system. The AL system is used in the following countries/areas:

		CONDENSATINetherlands, New Zealand, North
				Algeria, Australia, Austria, Bangladesh,
	TO AVOID		N	Belgium, Brunei, China, Croatia, Czech
				Republic, Denmark, Finland, Germany,
• Do not expose the camcorder to				Hong Kong Special Administrative
	sudden or extreme changes in			Region, Iceland, India, Indonesia, Iran,
				Iraq, Ireland, Israel, Italy, Jordan, Kenya,
	temperature.
				Kuwait, Liberia, Malaysia, Malta,
• Place the camcorder in an airtight
				Montenegro, Mozambique, the
	plastic bag and let it adjust to
	temperature changes slowly before			Korea, Norway, Oman, Pakistan,
	removing it from the bag.
				Poland, Portugal, Qatar, Romania,
	WHEN ONDENSATION IS DETECTED			Serbia, Sierra Leone, Singapore,
				Slovakia, Slovenia, South Africa, Spain,
				Sri Lanka, Swaziland, Sweden,
The camcorder automatically shuts off.				Switzerland, Tanzania, Thailand, Turkey,
The precise time required for water				Uganda, Ukraine, United Arab
droplets to evaporate will vary				Emirates, United Kingdom, Yemen,
depending on the location and weather				Zambia.
conditions. As a general rule, wait for 2
hours before resuming use of the
camcorder.

113