Applying
1If the joystick guide does not
appear on screen, press 
to display it.
If 
does not appear on the joystick guide, repeatedly push the joystick (
) toward [NEXT] to display it.
2Push the joystick (
) toward 
.
•The icon of the selected effect turns green.
•Push the joystick (
) again to deactivate the digital effect (its icon will turn white again).
TO FADE IN
Activate the selected fader in record
pause mode (
), then press START/STOP to start recording with a fade in.
TO FADE OUT
Activate the selected fader while recording (
), then press START/STOP to fade out and pause the recording.
TO ACTIVATE AN EFFECT
mode: Activate the selected effect while recording or in record pause mode.
mode: Activate the selected effect and then press PHOTO to record the still image.
NOTES
•When you apply a fader, not only the picture but also the sound will fade in or out. When you apply an effect, the sound will be recorded normally.
•The camcorder retains the last setting used even if you turn off the digital effects or change the recording program.
On-Screen Displays and Data Code
With every scene or still image recorded, the camcorder keeps a data code that includes the date, time and information about the camera setup at the time of recording. While viewing a still image, all the data is displayed in the form of information icons. During movie playback you can select what to display with the [DATA CODE] setting (
93). You can also turn most on- screen displays on or off.
Repeatedly press DISP. to turn the
, 
mode:
•All displays on
•Most displays off*
51