Cannon HF10 FUNC, FUNC, FUNC, press, NOTES, POINTS TO CHECK, Restarting rinting:, FUNCdesired and press, 3Select (, ) [PRINT] and, Erasing All Print Orders

Photos

Selecting Still Images for Printing (Print Order)

POINTS TO CHECK

Set the print orders before connecting the USB cable to the camcorder.

FUNC.

( 25)

1Open the image selection screen.

FUNC. [ PRINT ORDER]

appears on the screen.

2Select ( ) the still image you want to mark with a print order.3Press to set the print order. The number of copies appears in orange.4 Set () the number of copiesFUNCdesired and press .

To cancel the print order, set the number of copies to 0.

5 Repeat steps 2-4 to mark additional images with print ordersor press . twice to close the menu.Printing the Still Images Marked with Print Orders

FUNC.

( 26)

1Connect the camcorder to the printer using the supplied USB cable.

Connection . Refer to Connection Diagrams ( 77).

2Open the print settings menu.

	FUNC.	[	MENU]
[	PRINT]

•The print settings menu appears.

•If there are no still images marked with print orders, [SET PRINT ORDER] appears.

3Select (, ) [PRINT] and

press .

Printing starts. The print settings menu disappears when the printing is completed.

NOTES

•Depending on the connected printer, you can change some print settings before step 3 ( 70).

•To cancel the printing, refer to page 72.

•Restarting rinting: Open the print settings menu as explained in step 2. In the print settings menu, select

[RESUME]* and press . The remaining images will be printed. Printing cannot be restarted when the print order settings have been changed or if you deleted a still image with print order settings.

* In case the print order was interrupted after the first still image, this menu option will appear as [PRINT] instead.

Erasing All Print Orders

FUNC.

( 25)

FUNC.

[ MENU]

[ MEMORY OPER.]

[ERASE ALL ORD] [YES]

FUNC.

74