Cannon HF10 NOTES, Accessories, Fasten the grip belt, TO REMOVE THE GRIP BELT, TO USE THE WIRELESS CONTROLLER

Preparations

TO USE THE WIRELESS CONTROLLER

Point the wireless controller at the camcorder’s remote sensor when you press the buttons.

You can rotate the L D panel 180 degrees to use the wireless controller from the front of the camcorder.

NOTES

•The wireless controller may not work properly when the remote sensor is situated under strong light sources or direct sunlight.

•If the wireless controller does not work, check that [WL.REMOTE] is not set to

[ OFF ] ( 95). Otherwise, replace the battery.

AccessoriesFasten the grip belt.

•Adjust the grip belt so that you can reach the zoom lever with your index finger, and the START/STOP button with your thumb.

•You can remove the grip belt and replace it with the supplied wrist strap.

TO REMOVE THE GRIP BELT1Lift the padded handgrip's flap and detach the strap from the Velcro pad.

20