Samsung P55 manual Sharing Internet Access, How to Connect the Client to the Server

Sharing Internet Access

Set one computer as the sharing server and another computer as the client for two computers to share an Internet using one Internet line. Once the configuration is complete, you can use the Internet immediately.

If you perform Internet sharing setup by using Samsung Network Manager, the program must be installed into both computers.

There are three methods for setting each computer as a sharing server and a client as shown in the table. This document describes how to do so by giving an example to the typical connection method 1 (Wire+Wireless).

Sharing Server (Hereinafter referred to as server)

Computer that is equipped with two LANS and is directly connected to an Internet.

Sharing Client (Hereinafter referred to as client)

Computer that is not directly connected to the Internet and is able to use the Internet through the sharing server.

How to Connect the Client to the Server

	Network Device of the Server		Network Device
Connection				Check the connections before connecting to the
	Connection
		Connects to	of
Type	Device to the			Internet.
		the client.	the Client
	Internet
Method1	Wired LAN	Wireless LAN	Wireless LAN	It is wireless-to-wireless connection. First turn on
				the wireless LAN.
Method2	Wireless LAN	Wired LAN	Wired LAN	It is wire-to-wire connection. First use the LAN
				cable to connect two devices before setting the
Method3	Wired LAN	Wired LAN	Wired LAN	computer.
				In Method 3, you have to install the wired LAN
				card for connection.

93