Bluetooth
QCharacters are broken if I receive a business card in Korean or Chinese using the Bluetooth Send a Business Card function.
A1 This may happen when you send a Korean or Chinese business card by selecting the Select a business card from the files (*.vcf, *.vcd) option in the Send a Business Card menu. This is because the contents of the business card file are not set to Korean or Chinese character set (CHARSET). In this case, directly edit the contents of the business card file as follows.
(*.vcf, *.vcd) and select Connect Program > Select Program from the
Select Notepad from the program list.
Edit the contents as follows.
Example) N:MagicSense => N;CHARSET=KS_C_ 5601:MagicSense
For Korean, add CHARSET=KS_C_5601.
For Simplified Chinese (CHS), CHARSET=gb2312. For Traditional Chinese (CHT), CHARSET=Big5.
A2 To avoid this problem, send a business card directly from the address book of Microsoft Outlook or select the Select an Outlook business card option in the Send a Business Card menu and you can now normally send the business card without editing the VCF file.
QI cannot find or connect the headset.
A1 If the headset is connected to another device and is currently being used, you will not be able to locate it. In this case, even if you locate the headset, you will not be able to connect it. Disconnect the headset from the device and then try again.
A2 If the headset is connected to the power adapter, the Bluetooth wireless connection is not available. Disconnect the headset from the power adapter and try again.
A3 A Bluetooth headset generally provides On/Off and Pairing modes. To connect the headset to another Bluetooth device such as a computer or cellphone, it must be in Pairing mode. Switch the headset to Pairing mode and try again.
In general, a Bluetooth headset in Pairing mode is automatically switched to On/ Off mode after a pre- determined period of time.
