QIn the following cases, the screen blinks or displays noise for a short time (This only applies to nVidia graphics card.): (Click the Graphics Related tab, Change Resolution, Change Display Device, Remove the AC Adapter, Restart the System, Change PowerMizer level.)
AThis may happen while the video driver is examining the connected device. While detecting, any connected display devices may blink or some noise may occur.
QWhen I connect a projector, and change the setting to display screen image on both the LCD and the projector by pressing Fn + ( 
) keys, screen is not displayed properly.
APress Fn + (
) keys once again. If the same problem continues, it means the projector cannot support the resolution. Lower the resolution to 1024 x 768.
QThe playback screen of a DVD title or an MPEG file is only displayed on the LCD. (This only applies to nVidia graphics card.)
AVideo is displayed on a single display device by default, when LCD and CRT are selected simultaneously.
In the Display Properties window, select Settings tab > Advanced >
Select the Full Screen Video menu > Full Screen Video Control item, set the full screen device to
“Auxiliary Display” and then click the Apply button. Then you can view video on both the LCD and CRT display devices.
QThe Taskbar on the bottom of the screen does not appear when a projector is used as the display device.
AA This may happen, even though SXGA+ LCD supports the 1400x1050 mode, the projector does not support that mode. In this case change the resolution to 1024x768 (recommended) on your computer.
