Canon 10, elura20 Settings of the Still Image Recorded to a Memory Card

104
E
Using a Memory Card
(ELURA20 MC only)
Immediately after you have recorded a still image to a memory card, you can
check the image without switching the operation mode by the POWER dial.
(CARD PHOTO REVIEW)
You can also easily erase unwanted images while viewing still images recorded to
memory card, protect images from accidental erasure, or mark an image for
printing. (File Operation)
• Card Photo Review is set in CARD REC mode and File Operation is set in
CARD PLAYmode.
●Preventing Accidental Erasure (Protect )
Select important images and protect them from accidental erasure. If a memory
card is formatted, however, all images, including protected images, will be
permanently erased ( 117).
• The pre-recorded sample images provided on the supplied SD Memory Card
are already protected.
There are 3 ways to protect a still image (including the ways to cancel the
setting).
1. ➡CARD PHOTO REVIEWmenu ( 105)
2. ➡File Operation menu ( 106)
3. ➡Card Operations submenu ( 107)
●Marking a Still Image for Printing (Print Mark )
An image on a memory card must be marked before it can be printed. The camera
supports the DPOF (Digital Print Order Format) print format. Images can be
automatically printed on a DPOF-supporting Canon printer. Up to 50 images per
memory card can be print marked.
There are 3 ways to mark a still image for printing (including the ways to cancel
the setting).
To mark an image forprinting/erase print marks one at a time
1. ➡File Operation menu ( 106)
2. ➡Card Operations submenu ( 108)
To erase all print marks
3. ➡Card Operations submenu ( 109)
SINGLE
CARD
PLAY
INDEX
CARD
PLAY
SINGLE
CARD
PLAY
INDEX
CARD
PLAY
SINGLE
CARD
PLAY
CARD
REC
Settings of the Still Image Recorded to a Memory Card
CARD
CARD