131
E
Additional
Information
• The video heads need cleaning
( 126).
• The video heads need cleaning
( 126).
• The TV/VIDEO selector on the TV
isn’t set to VIDEO ( 30).
• The speaker has been turned off with
the SELECT dial ( 28).
• Headphones are being used.
?The playback picture is rough
(with mosaic-like noise).
?There’s no picture on the TV
screen, even though the tape is
moving.
?There’s no sound coming from the
speaker during playback.
Memory card operations ELURA20 MC only
Cause and/or what to do about it
• It is not turned the right way ( 95).
Turn it the right way and try inserting
again.
• Turn the camcorder’s power off and
back on again and remove and
reinsert the card. If the mark
continues to flash, format the
memory card.
• The POWER dial is not set to CARD
REC or CARD PLAY( 98, 102).
• The memory card is not inserted
( 95).
• You are using an SD Memory Card and
it is set for erasure prevention. Change
the position of the protect switch.
• The memory card is full. Erase
images ( 110) or insert a new
memory card.
• The power source is not properly
connected ( 11), or the battery
pack is exhausted or not properly
attached ( 12).
• The function can not be used in that
recording program ( 53).
Problem
?The memory card will not insert.
?The mark flashes red in the
display even though a memory
card has been inserted.
?Nothing happens when I press the
buttons.