51
E
Using the Full
Range of Features
• If the subject is unsuitable for autofocus ( 130), the camera may not be
able to focus, and Fmay continue to flash white in the display. Continue to
hold the PHOTO button halfway down, then adjust the focus manually with
the SELECT dial.
• If you are using manual focus ( 72), the Fmark starts as a continous
green mark. Focus with the SELECT dial.
2. Press the PHOTO button fully down to take the still picture.• The camera takes the image immediately, and then records the “photo” to
the tape for approximately 6 seconds*. During this time the camera also
records the sound, and the display shows the still picture.
• A counter display appears, and counts up as the camcorder records the
picture. Fdisappears from the display.
• The camera returns to record pause mode.
• The camera automatically returns to record pause mode after recording a still
image for approximately 6 seconds*. If you turn the POWER dial to OFF
during that time, the camcorder will respond only after recording is complete.
• The wireless controller ’s PHOTO button has no half-way setting. Press the
button fully and the camera immediately takes the “photo”.
• Only take “photos” where it is bright enough to see the image in the display.
• If you want to use an effect, make sure you set it before you take your picture.
*8 seconds in SPor LP recording mode.