76
E
Using the Full
Range of Features
You can also choose to display camera data (shutter speed and exposure settings)
in cassette data codes.
To change, open the menu and select DISP.SETUP. Then select DATA
CODE, set it to DATE/TIME, CAMERADATAor CAM. & D/T and close
the menu.
DATA CODE•••DATE/TIME
DISP.SET UP
( 35)
Setting the data code
JAN. 1,2001
12:00:00 AM
12:00 AM
JAN. 1,2001
F11
1/2000
F11
1/2000
JAN. 1,2001
F11
1/2000
12:00:00 AM
F11
1/2000
12:00 AM
JAN. 1,2001
F11
1/2000
F11
1/2000
Date/Time Camera data Date/Time &
Camera data
Time
Date & Time
Date
DATA CODE
D/TIME SEL.
(cassette
only)
• The data code will read “– – –” in the following situations:
– During playback of a blank section of tape.
– If the tape was recorded before entering the date and time in the camera’s
memory.
– If the tape was recorded on a camera without a data code function.
– If noise or tape damage prevents the data code from being read.
• If a recording made on ELURA10/ELURA20 MC is played back on a different
DV camcorder, the data code may not be displayed correctly.
• The data code will appear in the display even if DISPLAYS ( 137) has been
set to OFF through the menu.
Possible data code combinations:
VCR